Skip to content

Manuals

Detailed customer connection schedules The detailed customer connection schedules assist users planning to connect small generators to the Western Power distribution system. It addresses planning, protection, operational, certification and approval for commissioning issues.
Distribution design catalogue The Distribution design catalogue contains the approved standard equipment arrangements for the design of our underground and overhead distribution networks within the Western Power network.
Distribution commissioning manual This Distribution commissioning manual is for use when testing and commissioning activities of electrical apparatus on Western Power’s distribution network.
Distribution construction standards handbook The Distribution construction standards handbook is for both HV and LV of the overhead and underground system, including the streetlights. 
Distribution customer connection requirements The Distribution customer connection requirements details network arrangements for both customer connections and the interconnection of substations to Western Power's LV/HV distribution network within the South West Interconnected Network (SWIN)
Distribution substation plant manual The Distribution substation plant manual (DSPM) contains a suite of standard diagrammatic representation designs of Western Power plant and equipment within a specified land area (the distribution substation site).
Safety, health and environment requirements for contractors The Safety, health and environment requirements for contractors outlines our expectations of contractors.
Underground cable installation manual The Underground cable installation manual sets out the requirements for the safe and efficient installation of underground cables that are to be connected to our public distribution system. 
Underground distribution schemes manual (UDS) The Underground distribution schemes manual (UDS) contains the information required by developers and their electrical consultants to allow them the undertake the electrical reticulation of new subdivisions. 

Guidelines

Customer funded community engagement If you have requested work by Western Power you may be required to demonstrate that you have undertaken community engagement for your project.
Deciding between overhead and underground construction in road reserves Please refer to the process when deciding between overhead and underground construction in road reserves for power supplies associated with subdivision and non-subdivision projects.
Facility Model Guidelines Facility Model Guidelines specify Western Power’s requirements concerning the information and models that Users including new Applicants or Exiting Applicants modifying their facilities. These Guidelines enable Western Power to obtain the information needed to accurately model the behaviour of the plant connected to the South-West Interconnected System (SWIS) on an ongoing basis to fulfil a number of obligations such as planning, design, and network operation.
Guidelines for acceptable use of ICT systems The Guidelines for acceptable use of ICT systems seeks to ensure that ICT systems are used in a legal, ethical and responsible manner. The IT and Records Management policy sets out record-keeping obligations, and the ICT Cyber Security Standard sets out obligations to protect our systems.
Material selection guidelines for bedding sand, backfill sand, general backfill around cables The bedding sand and backfill sand around cables and general backfill for cable trenches - Material selection guidelines.
Network access billing Information about customer care and access billing management system.
Retailer connections Information for retailers regarding various connections and tariffs for customers
Small generator user guide The guide for the connection of generators up to 10 MW to our grid.
Small strata connections The Switchboard arrangement for small strata lot development guideline details the current subdivision and connection requirements for small strata developments of up to 4 lots.
Technical guidance for solar installers Information for solar installers relating to embedded generation systems.

Policies & Standards

Basic Embedded Generation Connection Technical Requirements The new Basic Embedded Generator Connection Technical Requirements provides guidance for installers and consumers on connection services and network type for embedded generation systems.
Build Pack The Build Pack defines the processes, procedures and methods used to communicate between the network operator and code participants. The Build Pack has been developed by consultative process between code participants.
Decorative fixtures, signs and banners on our assets The requirements for the attachment of fixtures, fittings, signs and banners on our poles and streetlight columns.
Distribution equipment labelling standard Distribution equipment labelling standard for the consistency in labelling equipment for distribution equipment on the distribution network.
Distribution overhead to underground conversion standard The distribution overhead to underground conversion standard sets out the conditions under which Western Power will provide a domestic underground connection within an existing overhead electricity distribution network.
Earthing Standards The Earthing Standards – Frequently asked questions gives information on earthing issues, including from minimum resistances, to the placement of earth rods. 
Electrical System Safety Rules (ESSR)

The Electrical System Safety Rules (ESSR) outline the minimum electrical safety standards for personnel working on, near or in the vicinity of Western Power’s electrical network and associated apparatus in Western Australia. The ESSR has been made publically available for contractors who are authorised to work on or near the network and reading the ESSR does not enable an ordinary person to access or work on the electrical network.

Generator Performance Standards

Generator Performance Standards (GPS) apply to Transmission Connected Generating Systems and are defined in the Wholesale Energy Market (WEM) Rules.

For more information refer to the Generator Performance Standards page.

High voltage pool policy

The high voltage (HV) subdivision pool allows the cost of installing HV infrastructure to be shared among developers of residential subdivisions.

HV substation feeder exit circuits isolation policy The HV substation feeder exit circuits isolation policy shows the requirements for all ZSFE circuits to have an isolation point on the remote end of the circuit before any Y Splits in the network or connections to transformers.
Limit Advice

This WEM Procedure describes the processes followed by Western Power and the matters it must consider in developing and updating Limit Advice provided to AEMO in accordance with clauses 2.27A.9 and 2.27A.11 and section 4.4B of the Wholesale Energy Market (WEM) Rules.

Metering code The Electricity Industry Metering Code 2012 provides information on the rights, obligations and responsibilities of Code participants. It outlines rules for providing metering installations at connection points, metering services, standing data and energy data.
Noise Compliance Requirements for Distribution Transformers Noise emissions from transformers located near existing or proposed noise sensitive premises will be evaluated in line with the Noise Compliance Requirements for Distribution Transformers to ensure sufficient separation or mitigation is in place.
Safety, Health and Environment policy The Safety, Health & Environment policy summarises our commitment to safe outcomes for our workforce, our customers and the environment.
Technical Rules

The Technical Rules are the technical requirements to be met by Western Power on the transmission and distribution systems and by users who connect facilities to the transmission and distribution systems. Western Power's planning criteria to be applied to the transmission and distribution systems are contained within these Rules. Prospective users or existing users who wish to connect facilities to the transmission and distribution systems must first submit an access application to us in accordance with the Access Code. For more information refer to the Technical Rules page.

Telecommunication equipment located in the vicinity of proposed distribution HV earths Requirements for high voltage distribution earthing system installations so they do not result in dangerous levels of earth potential rise (EPR) on nearby telecommunications assets. Telecommunication equipment located in the vicinity of proposed distribution HV earths.
Un-metered supply network standard The un-metered supply network standard sets out the requirements for the installation and connection of an un-metered supply to our low voltage distribution network. 
WA Service and Installation Requirements (WASIR)  The WA Service and Installation Requirements (WASIR) is a comprehensive reference for industry and the community when seeking an electrical connection of a consumer’s installation to the distribution network of Western Power’s South West interconnected system (SWIS).